분별결정(fractional crystallization) : 용해도의 차를 이용하여 결정을 석출시켜서, 두 성분 이상의 용질을 분리하는 방법. 분별정출(分別晶出)이라고도 한다. 특히 용해도의 차가 근소한 경우에는 이 조작을 반복할 필요가 있다. 예를 들면, 희토류원소는 화학적으로 매우 흡사하여 시약에 의한 분리가 곤란
Solvent) 등이 있다.
1) RESS(Rapid Expansion of Supercritical Solution)
RESS는 입자로 제조할 물질을 초임계유체에 용해시킨 후 미세한 노즐을 통하여 급속히 팽창시킨다<그림3>. 이때, 초임계유체가 gas로 되는 과정에서 용질이 빠른 시간에 과포화 되고 용해되어 있는 용질은 석출된다. 아래 그림4에 RESS 공정의 개
2. 2. Extraction
After the fermentation, the microorganisms(Alcaligenes latus) are filled with PHB in their body. These PHBs have to be separated from microorganisms to make final product. To separate PHBs from biomass, they are extracted from biomass by using solvent. These PHB extracted solvent will experience washing and drying process. After that, PHB can be precipitated as white powder.
2. Objective
1) To investigate of solid-liquid mixture flow characteristics in a slim hole annulus
2) Effect of pipe rotation, fluid property, annulus inclination on the particle transport velocity, transport efficiency and pressure drop
3. Theoretical background
3.1 Reynolds number
Reynolds number can be defined for a number of different situations where a fluid is in relativ
fraction
WATER
39392.7394
0.77417305
ETHANOL
29260.7275
0.22487379
CO2
118.481529
0.00095315
표 8. VAP1 stream
2) Separation Model
foolish model 이후 순수한 ethanol을 얻기 위한 separtion공정이다.
① D1 unit (distillation)
원할한 azeotropic distillation을 하기 위하여 별도의 Distillation 유닛을 달아 separartion model로 들어오는 feed strea
Specifications Group 안에 있는 Add 버튼을 클릭하고, Component Fraction을 선택한 뒤 Add Spec을 클릭한다. 아래쪽의 그림과 같이 입력시킨다.
14) Monitor에서 그림과 같이 체크 하면, 계산을 자동적으로 한 후에 Converged라는 글자가 나와야 한다. (수렴이 되지 않으면, 수렴이 되게 조건을 맞추고 RUN을 누른다.)
[Refrigeration Cycle]
1. 실험목적
가. 가시적으로 판별하기 힘든 평형의 원리를 온도, 압력 등의 조작변수와 연동하여 상평
형에 대해 이해한다.
나. 실험적으로 얻어낸 데이터와 문헌데이터 값을 비교하여 기-액 평형 및 증류에 대한
기초 지식을 습득한다.
다. Liquid-Liquid System의 액-액
1. Chain Microstructure
Stiffness: Chin flexibility, 분자 사이의 거리, Side chain의 flexibility 등의 영향
Chain Flexibility
single chain에서의 rotation이 결정한다. 입체장애로 인하여 Chain flexibility가 낮아지면 Tg는 증가한다.
Flexible side group
Side group에 의하여 분자간의 거리가 증가할 경우 free volume이 증가하고
solvent top 원료로 사용된다.
2.1.2. 추출공정(Extraction Unit)
수첨공정으로부터 오는 C6~C8 HEART CUT(HTPG)로부터 방향족 화합물을 회수하는 공정으로, 원료 중에 포함된 방향족을 높은 회수율로 추출하기 위해 낮은 운전온도에서 높은 선택성을 갖는 SULFOLANE 용매가 사용되며, 특히 SULFOLANE은 방향족 화합물